Hikoki VB3616DA 36V Rebar Cutter/Bender (2x 2.5Ah MultiVolt)

The Hikoki VB3616DA is the *world's first* cordless rebar cutter/bender! You can now perform exterior construction and house foundation work with cordless freedom. It both cuts and bends rebar for versatile working, plus you can cut and bend more than one rebar at once (depending on the rebar diameter) for fast work progress. It's extremely easy to operate and it allows you to make bends in a variety of pre-set angles with fine adjustment also possible.

CLAIM FREE BATTERY!

Claim a FREE 18V 5Ah / 36V 2.5Ah MultiVolt battery from Hikoki when you buy this product between the 1st October - 31st December. Click on the image below to make your claim on Hikoki's website. This promotion is run by Hikoki. If you're having any problems with your claim then you can contact them here.

• 2x 36V 2.5Ah / 18V 5Ah MultiVolt batteries (automatically change voltage for use with Hikoki's 36V MultiVolt and 18V ranges)
• UC18YSL3 rapid charger
• Carry case
• Cutter set
• Battery covers
• Wrench
• Extended 5 year warranty - registration required here within 4 weeks of purchase (3 year warranty as standard)

• The *world's first* cordless rebar cutter/bender! You can now perform exterior construction and house foundation work with cordless freedom.
• Dual functionality - Both cuts and bends rebar for versatile working
• Extremely easy operation:
  • Cutting
    1. Position this Hikoki cordless rebar cutter/bender for cutting
    2. Set the dial to CUT
    3. Open the cover
    4. Place the rebar on the lower cutter
    5. Pull the switch to cut the rebar
  • Bending
    1. Position this Hikoki 36V rebar cutter/bender for bending
    2. Set the bending angle with the dial
    3. Place the rebar against the guide stopper
    4. Pull the switch to bend the rebar
• Cut and bend more than one rebar at once (depending on the rebar diameter) for fast work progress
• Dial setting of the bending angle - With the turn of a pre-set dial, bends can be made in a variety of angles from 0-180 °
• Fine adjustment of the bending angle:
  • Variable speed switch trigger allows manual adjustment of the rebar angle based on your visual estimation
  • Reverse rotation mode allows you to reverse the bending roller by pulling the trigger, which makes it easy to remove bent rebars or check the bending angles
• Brushless motor for maximum performance and efficiency, plus a longer service life (completely maintenance-free)
• Battery cover keeps the battery protected
  
  

• Battery voltage: 36V MultiVolt
• Rebar capacity: ø 8-16 mm
• Cutting capacity ø 10 mm: 2 rebars at once
  Cutting capacity ø 13 mm: 1 rebar
  Cutting capacity ø 16 mm: 1 rebar
• Bending capacity ø 10 mm: 3 rebars at once
  Bending capacity ø 13 mm: 2 rebars at once
  Bending capacity ø 16 mm: 1 rebar
• Dimensions (L x W x H): 510 x 230 x 241 mm
• Weight with 2.5Ah MultiVolt battery: 18.6 kg
• Runtime per 2.5Ah MultiVolt battery charge cutting ø 10 mm SD295: 350 cuts (2 cuts at a time)
  Runtime per 2.5Ah MultiVolt battery charge cutting ø 13 mm SD295: 170 cuts
  Runtime per 2.5Ah MultiVolt battery charge cutting ø 16 mm SD345: 130 cuts
  Runtime per 2.5Ah MultiVolt battery charge bending (90°) ø 10 mm SD295: 630 bends (3 bends at a time)
  Runtime per 2.5Ah MultiVolt battery charge bending (90°) ø 13 mm SD295: 310 bends (2 bends at a time)
  Runtime per 2.5Ah MultiVolt battery charge bending (90°) ø 16 mm SD345: 140 bends
• Part number: VB3616DAJGZ
  
  

SD295 and SD345 are material designations of JIS (Japanese Industrial Standards). The figures are for reference only because applicable rebar standard is different depending on the area.

SD295A: Over 295 N/mm^² yield strength, 440-600 N/mm^² tensile strength

SD295B: 295-390 N/mm^² yield strength, over 440 N/mm^² tensile strength

SD345: 345-440 N/mm^² yield strength

Hikoki offer a standard 3 year warranty with all of their machines and batteries with a 4Ah capacity or more. You can extend this to a 5 year warranty for any 18V or 36V brushless machines and batteries with a 5Ah capacity or more by registering your product here within 4 weeks of purchase.

Delivery Info

Free UK Delivery
Over £99*

Next Working Day Delivery
Order by 3pm*

1 Hour Time Slot
via text alert

Delivery 6 Days a Week
Monday - Saturday

FREE Delivery

to UK mainland when you spend £99 (up to 30kg).

You can test your delivery postcode at the first step of the checkout.

A surcharge applies for orders that include a 'bulky item' or where the total weight is over 30kg. A 'bulky item' will highlight itself on the product description page. A surcharge also applies for orders that are being delivered to a UK offshore postcode. This surcharge is discounted when you spend over £99.

Order by 3pm for Next Working Day Delivery

Our working days are Monday - Friday.

Only for in-stock items (on the product description page it will display either 'next day' or '3-4 days dispatch'). Order by 2pm for items that trigger a 'freight rate' surcharge at the checkout (e.g. heavy generators and table saws) as well as anything that includes gas canisters (e.g. Paslode nails). Please allow an extra day for Scottish Highlands postcodes. Freight items can not be delivered offshore.

Small Parcel Cheaper Delivery - £3.79

Untracked 7-12 working day delivery (small parcels) (3-5 working day for UK Mainland)

We provide a low-cost delivery for certain small parcels of up to 2kg for orders under £99. This service is provided by Royal Mail (currently on a 7-12 working day/3-5 working day service if in stock and depending on your location). It's applicable on some accessories from Bosch, Festool, DeWalt, Trend, Fein and Makita. Some compact 18V body only tools will also qualify. This service won't accept any combustible items such as canisters, cartridges or lithium batteries.

NEW & Improved Secure Deliveries

PIN code verification at your doorstep

We've improved the security of our deliveries to you with DPD's PIN code verification system. We will be using this service on most orders to ensure your parcel gets to you securely.

You will receive a PIN code via text and/or email which you must recite to the delivery driver on arrival. If someone is receiving the parcel on your behalf, remember to pass on the code to them. The driver can also resend the PIN code to the original contact on arrival if required. This service requires a mobile phone number with your order so please ensure you provide one to take advantage.

- Our deliveries are very easy to track, plus you'll get a handy 1 hour delivery window so you know when to expect your items. You'll receive a tracking number with your 'order dispatched' email.

- Your VAT invoice is always in the box with your goods.

- Your goods are always securely packaged when leaving our warehouse. We strive to ensure your goods reach you in prime condition.

- Our main courier is DPD. We use DPD for the vast majority of our deliveries. APC and TNT handle other specific types of deliveries for us. In poor weather conditions our couriers may experience delays that are out of our control, however we will help you in every way possible to track delivery progress.

- Delivery to construction/job sites is possible, but done so at your own risk. Our service can deliver to an address, but we can't guarantee delivery to a specific person or location at the address. For the best outcome, please provide detailed courier instructions and a contact number that we can pass on to the courier.

- Delivery to 'safe place' is not available for most orders, someone must be present to receive your delivery. We do this to ensure our couriers deliver to the right person at the right address, to ensure your goods are not lost or stolen. Particularly as most orders are of high value.

Prices

UK Standard Delivery (Goods below 30kg)